USB Storage
58
N600 Wireless Dual Band Router WNDR3400v3
2. Click the Approved Devices button. The USB Drive Approved Devices screen displays:
This screen shows the approved USB devices and the available USB devices. You can
remove or add approved USB devices.
3. T
o add an approved USB device, select it from the Available USB Devices list and click
Add.
4. Select the Allow only
approved devices check box.
5. Click Apply
so that your change takes effect.
If you want to work with another USB device, click the Safe
ly Remove USB Device button
for the currently connected USB device. Connect the other USB device and repeat this
process.
Connect to the USB Drive from a Remote Computer
To connect to the USB drive from remote computers with a web browser, you have to use the
router’s Internet port IP address. If you are using Dynamic DNS, you can type the DNS name,
rather than the IP address. You can view the router’s Internet IP address from the dashboard
on the Basic Home screen or the Advanced Home screen.
Access the Router’s USB Drive Remotely Using FTP
To connect to the router’s USB drive using a web browser:
1. Connect to the ro
uter by typing ftp:// and the Internet port IP address in the address
field of Internet Explorer or Netscape Navigator, for example:
ftp://10.1.65.4
If you are using Dynamic DNS, you can type the DNS name rather than the IP address.
To Next Page
Loading...
Need help?
General
