Advanced Settings
95
N600 Wireless Dual Band Router WNDR3400v3
This value represents the number of routers between your network and the destination.
Usually, a setting of 2 or 3 works, but if this is a direct connection, set it to 1.
9. Click App
ly to add the static route.
Remote Management
The remote management feature lets you upgrade or check the status of your N600 Wireless
Dual Band Router over the Internet.
To set up remote management:
1. Select Adv
anced > Advanced Setup > Remote Management.
Note: Be sure to change the router’s default login password to a secure
password. The ideal password should contain no dictionary words from any
language and contain uppercase and lowercase letters, numbers, and
symbols. It can be up to 30 characters.
2. Select th
e Turn Remote Management On check box.
3. Unde
r Allow Remote Access By, specify the external IP addresses allowed to access the
router’s remote management.
Note: For enhanced security, restrict access to as few external IP addresses
as
practical.
• T
o allow access from a single IP address on the Internet, select Only This Computer.
Enter the IP address that allows access.
• T
o allow access from a range of IP addresses on the Internet, select IP Address
Range. Enter a beginning and ending IP address to define the allowed range.
• T
o allow access from any IP address on the Internet, select Everyone.
To Next Page
Loading...
