Advanced Settings
93
N600 Wireless Dual Band Router WNDR3400v3
On the Advanced tab, select Advanced Setup > Dynamic DNS to display the following
screen:
To set up Dynamic DNS:
1. Reg
ister for an account with one of the Dynamic DNS service providers whose URLs
appear in the Service Provider list.
2. Select th
e Use a Dynamic DNS Service check box.
3. Select th
e URL of your Dynamic DNS service provider. For example, for DynDNS.org,
select www.dyndns.org.
4. T
ype the host name (or domain name) that your Dynamic DNS service provider gave you.
5. T
ype the user name for your Dynamic DNS account. This is the name that you use to log in
to your account, not your host name.
6. T
ype the password (or key) for your Dynamic DNS account.
7. Click App
ly to save your configuration.
Static Routes
Static routes provide additional routing information to your router. Under usual
circumstances, the router has adequate routing information after it has been configured for
Internet access, and you do not need to configure additional static routes. You have to
configure static routes only for unusual cases such as multiple routers or multiple IP subnets
located on your network.
As an example of when a static route is needed, consider the following case:
• Y
our primary Internet access is through a cable modem to an ISP.
• Y
ou have an ISDN router on your home network for connecting to the company where
you are employed. This router’s address on your LAN is 192.168.1.100.
• Y
our company’s network address is 134.177.0.0.
To Next Page
Loading...
