NETGEAR N600 WNDR3400v3 User Manual

7
1
1. Hardware Setup
Getting to know your router
The N600 Wireless Dual Band Router WNDR3400v3 provides you with an easy and secure way
to set up a wireless home network with fast access to the Internet over a high-speed digital
subscriber line (DSL) or a cable broadband service provider. It is compatible with all major DSL
Internet service providers and cable broadband service providers, lets you block unsafe Internet
content and applications, and protects the devices (computers, gaming consoles, and so on) that
you connect to your home network.
Note: For more information about the topics covered in this manual, visit
the support website at http://support.netgear.com.
If you have not already set up your new router using the installation guide that comes in the box,
this chapter walks you through the hardware setup.
Chapter 3, genie Basic Settings, explains
how to set up your Internet connection.
This chapter contains the following sections:
• Unpack Your Router
• Position Your Router
• Hardware Features
• Cable Your Router
• Verify the Cabling

NETGEAR N600 WNDR3400v3 Specifications

General

Model	WNDR3400v3
Category	Wireless Router
Wireless Standard	802.11n
Frequency Bands	2.4 GHz, 5 GHz
Ethernet Ports	4 x 10/100 Mbps LAN, 1 x 10/100 Mbps WAN
USB Ports	1 x USB 2.0
Antenna	Internal
Security Features	WPA, WPA2
Firewall	NAT
VPN Support	Yes
Weight	0.35 kg
Maximum Speed	300 Mbps (2.4 GHz), 300 Mbps (5 GHz)