Hardware Setup
8
N600 Wireless Dual Band Router WNDR3400v3
Unpack Your Router
Open the box and remove the router, cables, and installation guide.
Ethernet cable
Router stand
(two pieces)
Power adapter
N600 wireless router
N
wirele
r
Your box should contain the following items:
• N600
Wireless Dual Band Router WNDR3400v3
• Route
r stand (two pieces)
• AC power a
dapter (plug varies by region)
• Categ
ory 5 (Cat 5) Ethernet cable
• In
stallation guide with cabling and router setup instructions
If any parts are incorrect, missing, or damaged,
contact your NETGEAR dealer. Keep the
carton and original packing materials, in case you need to return the product for repair.
Position Your Router
The router lets you access your network from anywhere within the operating range of your
wireless network. However, the operating distance or range of your wireless connection can
vary significantly depending on the physical placement of your router. For example, the
thickness and number of walls the wireless signal passes through can limit the range. For
best results, place your router:
• Near
the center of the area where your computers and other devices operate and
preferably within line of sight to your wireless devices.
• So it is accessible to a
n AC power outlet and near Ethernet cables for wired computers.
• In
an elevated location such as a high shelf, keeping the number of walls and ceilings
between the router and your other devices to a minimum.
• A
way from electrical devices that are potential sources of interference, such as ceiling
fans, home security systems, microwaves, computers, or the base of a cordless phone or
2.4 GHz or 5 GHz cordless phone.
To Next Page
Loading...
Need help?
General
