Administration
71
N600 Wireless Dual Band Router WNDR3400v3
Wireless Settings (2.4 GHz and 5 GHz)
The following settings are displayed:
Name (SSID). The wireless ne
twork name (SSID) used by the router. The default names for
the 5 GHz network ends in -5G to distinguish it from the 2.4 GHz network.
Region. The
geographic region where the router is being used. It might be illegal to use the
wireless features of the router in some parts of the world.
Channel. Id
entifies the operating channel of the wireless port being used. The default
channel is Auto. When Auto is selected, the router finds the best operating channel available.
If you notice interference from nearby devices, you can select a different channel. Channels
1, 6, and 11 do not interfere with each other.
Mode.
Indicates the wireless communication mode: Up to 54 Mbps, Up to 130 Mbps
(default), and Up to 300 Mbps.
Wireless AP. Indicate
s whether the radio feature of the router is enabled. If this feature is not
enabled, the Wireless LED on the front panel is off.
Broadcast Name. Indicates whethe
r the router is broadcasting its SSID.
Wireless Isolation. Select this
check box only if you want to prevent wireless connections to
the router.
Wi-Fi Protected Setup. Indicates whethe
r Wi-Fi Protected Setup is configured for this
network.
To Next Page
Loading...
Need help?
General
