NETGEAR N600 WNDR3400v3 - Ipv6; Traffic Meter

Advanced Settings
98
N600 Wireless Dual Band Router WNDR3400v3
IPv6
You can use this feature to set up an IPv6 Internet connection type if NETGEAR genie does
not detect it automatically.
 To set up an IPv6 Internet connection type:
1. Select Advance
d > Advanced Setup > IPv6 to display the following screen:
2. Select the IPv6 connection type from the list of Internet connection types. Your Internet
service provider (ISP) can provide this information.
• If your I
SP did not provide details, you can select 6to4 Tunnel.
• If
you are not sure, select Auto Detect so that the router detects the IPv6 type that is
in use.
• If your I
nternet connection does not use PPPoE, DHCP, or fixed, but is IPv6, then
select Auto Config.
3. Click Apply
so that your changes take effect.
Traffic Meter
Traffic metering allows you to monitor the volume of Internet traffic passing through your
router’s Internet port. With the traffic meter utility, you can set limits for traffic volume, set a
monthly limit, and get a live update of traffic usage.