Name: NETGEAR N600 WNDR3400v3
Brand: NETGEAR
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Advanced Settings

N600 Wireless Dual Band Router WNDR3400v3

2. Select the Port Triggering radio button to display the port triggering information.

3. Clear the Disable Port Triggering check box if it is selected.

Note: If the Disable Port Triggering check box is selecte

d after you configure

port triggering, port triggering is disabled. However, any port triggering

configuration information you added to the router is retained even though it is

not used.

4. In the Port T

riggering Timeout field, enter a value up to 9999 minutes. This value controls

the inactivity timer for the designated inbound ports. The inbound ports close when the

inactivity time expires. This is required because the router cannot be sure when the

application has terminated.

5. Click Add

Service to display the following screen:

6. In the Service Name field, type a descriptive service name.

Questions and Answers:

Need help?

Do you have a question about the NETGEAR N600 WNDR3400v3 and is the answer not in the manual?

NETGEAR N600 WNDR3400v3 Specifications

General