NETGEAR Nighthawk RS600 - Rear Panel

Rear panel
The following figure shows the rear panel connectors and buttons.
A
B
C
D
E
F
G
Figure 3. Rear panel
The rear panel contains the following components:
•
A. Reset button: Pressing the Reset button resets the router.
If the Reset button is pressed for at least five seconds and the Power LED blinks
amber, the router returns to its factory settings.
•
B. Power On/Off button: Press the Power On/Off button to provide power to the
router.
User Manual15Hardware Setup
Nighthawk WiFi 7 Tri-Band Router Model RS600