NETGEAR Nighthawk RS600 - Manage Blocked Devices Currently Not on the Network

Manage blocked devices currently not on
the network
If you set up an access control list (ACL) that allows all new devices to access the network,
you can add new devices that must be blocked from accessing the network, remove
old devices, or change whether devices that were blocked must now be allowed when
they try to connect to the network.
To manage blocked devices currently not on the network:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Access Control.
The Access Control page displays.
5. Click the View list of blocked devices not currently connected to the network
link.
The Access Control page displays.
A table displays the detected device name, MAC address, and connection type of
the devices that are not connected and are blocked from accessing the network.
In the following steps, we refer to the list of blocked devices not currently connected
to the network as the list of blocked devices.
6. To add a device to the list of blocked devices, do the following:
a. Click the Add button.
The Add Blocked Device page displays.
b. Enter the MAC address and device name for the device that you want to block.
c. On the Add Blocked Device page, click the Apply button.
The device is added to the list of blocked devices.
7. To remove a device from the list of blocked devices, do the following:
a. Select the check box for the device.
b. Click the Remove from the list button.
User Manual58Control Access to the Internet
Nighthawk WiFi 7 Tri-Band Router Model RS600