NETGEAR Nighthawk RS600 - Manage the SIP Application-Level Gateway

The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > WAN Setup.
The WAN Setup page displays.
5. Select a NAT Filtering radio button:
•
Secured: Blocks more unsolicited traffic from the Internet but might prevent
some Internet games, point-to-point applications, or multimedia applications
from functioning. This is the default setting.
•
Open: Provides a less secured firewall but allows almost all Internet applications
to function.
6. Click the Apply button.
Your settings are saved.
Manage the SIP application-level gateway
The application-level gateway (ALG) for the Session Initiation Protocol (SIP) is enabled
by default for enhanced address and port translation. However, some types of voice
over IP (VoIP) and video traffic might not work well when the SIP ALG is enabled. For
this reason, the router provides the option to disable the SIP ALG.
To disable the SIP ALG:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > WAN Setup.
The WAN Setup page displays.
5. Select the Disable SIP ALG check box.
Selecting the Disable SIP ALG check box disables the SIP ALG and clearing the
Disable SIP ALG check box enables the SIP ALG. By default, the SIP ALG is enabled.
6. Click the Apply button.
User Manual86Manage the WAN and LAN
Network Settings
Nighthawk WiFi 7 Tri-Band Router Model RS600