NOTE: If you first disable and then reenable Smart Connect and the security
settings for the 2.4 GHz, 5 GHz, and 6 GHz radios do not match, the security
settings for the 2.4 GHz radio overwrite the WiFi settings for the 5 GHz and
6 GHz radios. If WPA2-Personal + WPA3-Personal is selected, the 2.4 GHz
and 5 GHz radios use the mixed setting, while the 6 GHz radio uses WPA3.
If WPA3-Personal is selected, all three bands use WPA3.
NOTE: Whether or not Smart Connect is enabled, the WiFi security for the
6 GHz WiFi network is set at WPA3-Personal. This security option enables
WiFi devices that support WPA3 to join the 6 GHz WiFi network. WPA3 is the
latest security standard, uses SAE encryption, and is required to join the 6
GHz WiFi network.
7. Click the Apply button.
Your settings are saved.
Change the 2.4 GHz, 5 GHz, or 6
GHz WiFi channel
You can change the 2.4 GHz, 5 GHz , or 6 GHz WiFi channel.
In some regions, not all channels are available. Do not change the channel unless you
experience interference (shown by lost connections or slow data transfers). If this
happens, experiment with different channels to see which is the best.
When you use multiple access points, it is better if adjacent access points use channels
as distant from each other as possible to reduce interference.
NOTE: If you change the 2.4 GHz, 5 GHz, or 6 GHz channel, the change also
applies to the guest network.
To change the WiFi channel:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
User Manual72Manage WiFi Settings
Nighthawk WiFi 7 Tri-Band Router Model RS600
To Next Page
Loading...
