NETGEAR Orbi Pro WiFI 6

The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > VLAN / Bridge Settings.
The VLAN / Bridge Settings page displays.
For the router (base) and each satellite, the ports display on the page. The ports that
are connected are outlined in blue. Unused ports are outlined in gray.
5.
In either the Base (router) or Satellite section, click an Ethernet port that is part of
the LAG.
The Unbind button displays.
6. Click the Unbind button.
The ports are unbound.
7. Click the Apply button.
Your settings are saved.
User Manual137Manage the LAN and WAN
Settings
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80