NETGEAR Orbi Pro WiFI 6 User Manual

Figure 4. Orbi Pro WiFi 6 satellite label
Connect your Orbi Pro WiFi 6 router
If you want to connect your Orbi Pro WiFi 6 router to an existing gateway, we recommend
that you turn off your existing gateway’s WiFi.
To cable your router:
1.
Unplug your modem’s power, leaving the modem connected to the wall jack for
your Internet service.
If your modem uses a battery backup, remove the battery, and then put the battery
back in.
2. Plug in and turn on your modem.
3.
Connect your modem to the Internet port of your router with the Ethernet cable that
came with your router.
User Manual18Overview
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80

NETGEAR Orbi Pro WiFI 6 Specifications

General

WiFi Technology	WiFi 6 (802.11ax)
Bands	Tri-band
MU-MIMO	Yes
Beamforming	Yes
WiFi Performance	AX6000
OFDMA	Yes
Coverage	Up to 6, 000 sq ft
Maximum Data Transfer Rate	6 Gbps
Ethernet Ports	4 x Gigabit Ethernet ports
Security	WPA3
Processor	Quad-Core 2.2GHz processor
Memory	512MB NAND Flash and 1GB RAM
USB Ports	1 x USB 3.0
Number of Devices Supported	Up to 100