NETGEAR PR2000 Installation Guide

7
Connection Ports and Reset Button
Connect or reset your personal router using the following items:
USB
LAN
Internet/LAN
Reset
N
ETGEAR
Reset
button
Connection
ports
• Reset button. To reset the personal router to
its factory settings, insert a paper clip into the
Reset hole and hold it until the Power LED
blinks.
• Internet/LAN port. An
Ethernet port for an
Internet connection.
• LAN
port. A
LAN port for any Ethernet-
enabled device.
• USB
port. A
USB port for USB storage or
USB printer. When plugged into the wall, the
USB port can be used as a cell phone
charger.
Antenna Orientation
NETGEAR
Internet
via
Wired
Power Off
Wireles
Power
Internet
WiFi
USB
WiFi
USB
USB
LAN
Internet/LAN
Reset
NETGEAR
Power
Internet
NETGEAR
LAN
Internet/LAN
Reset
USB
WiFi
USB
Power
Internet
The WiFi antenna is inside the cover.
Rotate the cover clockwise to orient
the antenna. For best performance,
keep the cover vertical when you use
your personal router.

NETGEAR PR2000 Specifications

General

Brand	NETGEAR
Model	PR2000
Category	Network Router
Language	English