NETGEAR PR2000

8
Internet Connection Setup
Connect to the Internet with an Ethernet cable.
NETGEAR
Power
Internet
WiFi
USB
Wired
Power Off
Wireles
DSL or
cable modem
(Optional) Connect a USB device to the USB port
 To connect to the Internet with an Ethernet cable:
1. Connect an Ethernet cable between the Internet/LAN port of the
personal router and the Ethernet port of your DSL or cable modem.
2. Connect an Ethernet cable between the LAN port of the personal
router and the Ethernet port of your computer.
3. Connect the personal router to a power source.
For more information, see Power Inputs on page 5.