GS700TP Hardware Installation Guide
Introduction 1-3
v1.0, January 2007
• Auto-sensing and auto-negotiating capabilities for all ports.
• Auto Uplink™ on all ports to make the right connection.
• Automatic address learning function to build the packet-forwarding information table. The
table contains up to 4K Media Access Control (MAC) addresses.
• Full- and Half-duplex functions for all 10/100/1000 Mbps ports.
• Store-and-Forward transmission to remove bad packets from the network.
• Full-duplex IEEE 802.3x pause frame flow control.
• Active flow control to minimize packet loss/frame drops.
• Half-duplex back-pressure control.
• Per port LEDs, System LEDs.
• Internal power supply.
• Standard 1U high, rack mountable 17” chassis.
• Fan speed control supported (optional)
• GS724TP supports the following POE functions:
• Smart Power Managed function handles the power of each port in the event of limited
available power.
• Support 24-Port POE function, 15.4W for 12 ports , 8W for 24 ports , Total 192W for
POE. GS724TP using data pairs (RJ-45 1,2,3&6 PIN) provide power to PD.
• GS748TP supports the following POE functions:
• Smart Power Managed function handles the power of each port in the event of limited
available power.
• Support 48-Port POE function, 15.4W for 24 ports , 8W for 48 ports , Total 384W for
POE. GS748TP using data pairs (RJ-45 1,2,3&6 PIN) provide power to PD.
To Next Page
Loading...
