NETGEAR ProSAFE Plus GS108PEv3 - User Manual

Installation
Step 1. Connect the equipment.
ProSAFE Plus 8-Port Gigabit Switch with
4-Port PoE
GS108PEv3
Step 2. Connect to power. Step 3. Check the status.
Power LED Right PoE LEDs (Ports 1–4) Le Port LEDs (Ports 1–8)
On PoE in use 1000 Mbps
link
O PoE halted 10/100 Mbps
No PoE use (o )
Activity
(blinking)
No link (o )
PoE Max. LED
Less than 7W of PoE power is available.
PoE Max. LED was activated in the previous two minutes
(blinking).
PoE ports are working normally (o ).
GS108PEv3 Optional router
Optional modem
IP Phone Server
Internet

NETGEAR ProSAFE Plus GS108PEv3 Specifications

General

Brand	NETGEAR
Model	ProSAFE Plus GS108PEv3
Category	Switch
Language	English

Summary

Switch Installation and Initial Setup

Connect the Equipment

Illustrates connecting IP phone, server, internet, modem, and router to the switch.

Connect to Power

Shows how to connect the switch to a power source using the provided adapter.

Check Status Indicators

Explains the meaning of Power, PoE, and Link LEDs for monitoring switch status.

Switch Configuration Utility

Install Configuration Utility

Guide to installing the ProSAFE Plus Utility software from the resource CD onto a computer.

Configure the Switch

Steps for launching the utility, selecting the switch, entering the password, and configuring settings.

Product Specifications

Support and Resources