User Manual for the NETGEAR PS121 Mini Print Server
Setup 3-7
Set up the correct printer driver for the
printer port.
a. Click Next to proceed to the Select
Printer screen. If you see the exact
printer model number listed as the
printer model number from in the
previous screen, click it to select it from
the list.
In this example it is the HP LaserJet
1200 printer.
b. If prompted, print a test page to verify
operation of the printer and the PS121.
Note: If your printer is not listed in the
Select Printer screen list, follow the
instructions in step 3 below. Otherwise,
follow the instructions below to finish.
c. Then, close any remaining Add Printer
Port Wizard or Windows Add Printer
Wizard windows.
Use the NETGEAR PS121 Mini Print
Server Resource CD to run the Add
Printer Port Wizard to set up each PC on
you network that you want to use with
the PS121.
Port/Printer Name Screen
Select the port you added
To Next Page
Loading...
