NETGEAR PTVU1000 - Page 28

28
Push2TV HD Adapter
• The resolution, color depth, and refresh rate of the primary screen are duplicated on the
display connected to the HD Base.
• If the display connected to the HD Base supports a lower resolution than the primary
display, the primary graphics device will have its resolution changed automatically to
ensure that the whole picture fits on the additional display screen.
• If the display screen connected to the HD Base is larger than the primary screen, the
image will be adjusted to a letter-box frame to preserve the correct aspect ratio.
Note: When you change from Extend to Mirror mode, NETGEAR
recommends that you first set the display to Off, and then set it to
Mirror.
Setting Extend Mode in Windows XP/Vista
To set the display to Extend mode:
Right-click the Display icon
and select Extend from the context menu. You can also
select the Extend To option to specify which side of the extended space is occupied by the
extended display.
Note: When you change from Mirror to Extend mode, NETGEAR
recommends that you first set the display to Off, and then set it to
Extend.