NETGEAR R6400v2 User Manual

Share a USB Printer
103
AC1750 Smart WiFi Router
 To use the scan feature of a multifunction USB printer:
1. Launch the NETGEAR USB Control Center
.
2. Make sure that the printer status shows as
Available.
3. C
lick the Network Scanner button.
The scanner page displays so that you can use the USB printer for scanning.
Change NETGEAR USB Control Center Settings
You can stop the NETGEAR USB Control Center from starting automatically when you log in
to Windows. You can also change the language and specify the time-out to release the
printer connection.
 To turn off automatic NETGEAR USB Control Center startup:
1. Select T
ools > Configuration.
2. Clear the Automatically execute when logging on W
indows check box.

NETGEAR R6400v2 Specifications

General

WiFi Performance	AC1750 (450 + 1300 Mbps)
USB Ports	1 x USB 3.0
Antenna	3 external antennas
Beamforming	Yes
MU-MIMO	Yes
Parental Controls	Yes
Quality of Service (QoS)	Yes
WiFi Technology	802.11ac
Processor	Dual Core
Ethernet Ports	5 x 10/100/1000 Mbps Gigabit Ethernet ports (1 WAN & 4 LAN)
Security	WPA/WPA2
Dimensions	11.22 x 7.26 x 1.97 inches