Access the Router’s USB Drive Through the Internet
89
AC1750 Smart WiFi Router
Change the Dynamic DNS Settings
To change your settings:
1. Launch an Internet browser from a computer or mobile device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Settings > Dynamic DNS.
The Dynamic DNS page displays.
5. Change your DDNS account settings as necessary.
6. Click the Apply button.
Your changes are saved.
Set Up Your Personal FTP Server
To set up your personal account and use FTP:
1. Get your free NETGEAR Dynamic DNS domain name.
See Your Personal FTP Server on page 85.
2. Make sure that your Internet connection is working.
Your router must use a direct Internet connection. It cannot connect to a different router to
access the Internet.
3. Connect a USB hard disk drive to a USB port on the router.
4. Set up FTP access in the router.
See Set Up FTP Access Through the Internet on page 83.
On a remote computer with Internet access, you can use FTP to access your router using
ftp://yourname.mynetgear.com.
5. On your WAN PC, you can FTP to your router using ftp://yourname.mynetgear.com.
Remotely Access a USB Device Using ReadyCLOUD
NETGEAR ReadyCLOUD for routers lets you remotely access files stored on a USB storage
device that is connected to the router. Before you can use ReadyCLOUD, you must create a
ReadyCLOUD account and register your router.
To Next Page
Loading...
Need help?
General
