NETGEAR R6400v2 User Manual

105
10
10. Specify Network Settings
This chapter includes the following sections:
• Disable LED Blinking or Turn Off LEDs
• View the WAN Settings
• Set Up a Default DMZ Server
• Change the Router’s Device Name
• Change the LAN TCP/IP Settings
• Specify the IP Addresses That the Router Assigns
• Disable the DHCP Server Feature in the Router
• Manage Reserves LAN IP Addresses
• Use the WPS Wizard for WiFi Connections
• Specify Basic WiFi Settings
• Change the WiFi Security Option
• Set Up a Guest Network
• How the Router Manages WiFi Clients
• Control the Wireless Radios
• Set Up a Wireless Schedule
• Specify WPS Settings
• Set Up the Router with an Existing Router or Gateway
• Use the Router as a Wireless Access Point
• Set Up the Router in Bridge Mode

NETGEAR R6400v2 Specifications

General

WiFi Performance	AC1750 (450 + 1300 Mbps)
USB Ports	1 x USB 3.0
Antenna	3 external antennas
Beamforming	Yes
MU-MIMO	Yes
Parental Controls	Yes
Quality of Service (QoS)	Yes
WiFi Technology	802.11ac
Processor	Dual Core
Ethernet Ports	5 x 10/100/1000 Mbps Gigabit Ethernet ports (1 WAN & 4 LAN)
Security	WPA/WPA2
Dimensions	11.22 x 7.26 x 1.97 inches