NETGEAR R6400v2 User Manual

Specify Network Settings
129
AC1750 Smart WiFi Router
7. Click the setup bridge mode wireless settings button.
8. Specify the settings of the other router to which this router will connect:
a. Select the wireless network frequency (2.4 GHz or 5 GHz).
For 802.11ac mode, select 5 GHz.
b. In the Name (SSID) field, enter the wireless network name (SSID).
c. In the Security Options section, select a radio button.
d. If prompted, type the WiFi password (network key) that you use to connect
wirelessly to the other router
.
9. Click the Apply button.
The settings for the other router are saved and the Advanced Wireless Settings page
displays.
10. Click the Apply button on the
Advanced Wireless Settings page.
Your changes take effect.

NETGEAR R6400v2 Specifications

General

WiFi Performance	AC1750 (450 + 1300 Mbps)
USB Ports	1 x USB 3.0
Antenna	3 external antennas
Beamforming	Yes
MU-MIMO	Yes
Parental Controls	Yes
Quality of Service (QoS)	Yes
WiFi Technology	802.11ac
Processor	Dual Core
Ethernet Ports	5 x 10/100/1000 Mbps Gigabit Ethernet ports (1 WAN & 4 LAN)
Security	WPA/WPA2
Dimensions	11.22 x 7.26 x 1.97 inches