Remote Access
You can access your router over the Internet to view or change its settings.You must know the router’s
WAN IP address to use this feature. For information about remote access using Dynamic DNS, see Set Up
and Manage Dynamic DNS on page 122.
Be sure to change the password for the user name admin to a secure password.The
ideal password contains no dictionary words from any language and contains uppercase
and lowercase letters, numbers, and symbols. It can be up to 30 characters. See Change
the admin Password on page 89.
Note
Set Up Remote Management
To set up remote management:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net in the address field.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Remote Management.
5. Select the Turn Remote Management On check box.
6. In the Allow Remote Access By section, specify the external IP addresses to be allowed to access the
modem router’s remote management.
For enhanced security, restrict access to as few external IP addresses as practical.Note
Select one of the following:
Manage Your Network
104
Nighthawk AC1900 WiFi LTE Modem Router
To Next Page
Loading...
