The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > WPS Wizard.
A note explaining WPS displays.
5. Click the Next button.
The WPS page displays.
6. Select a setup method:
• Push button. Click the WPS button on this screen.
• PIN Number.The page adjusts. Enter the client security PIN and click the Next button.
7. Within two minutes, go to the WPS-enabled device and use its WPS software to connect to the WiFi
network.
The WPS process automatically sets up yourr WPS-enabled device with the network password when
it connects.The modem router WPS page displays a confirmation message.
Specify Basic WiFi Settings
The router comes with preset security.This means that the WiFi network name (SSID), network key
(password), and security option (encryption protocol) are preset in the factory.You can find the preset SSID
and password on the label on the router.
The preset SSID and password are uniquely generated for every device to protect
and maximize your WiFi security.
Note
We recommend that you do not change your preset security settings. If you change your preset security
settings, make a note of the new settings and store it in a safe place where you can easily find it.
If your computer is connected with WiFi when you change the SSID or other WiFi security settings, you are
disconnected when you click the Apply button.To avoid this problem, use a computer with a wired connection
to access the modem router.
To specify basic WiFi settings:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
Network Settings
67
Nighthawk AC1900 WiFi LTE Modem Router
To Next Page
Loading...
Need help?
General
