Factory Settings
You can return the modem router to its factory settings. Use the end of a paper clip or a similar object to
press and hold the Reset button on the back of the router for at least seven seconds.The modem router
resets and returns to the factory configuration settings shown in the following table.
Table 3. Factory default settings
Default SettingFeature
www.routerlogin.com or www.routerlogin.netUser login URLRouter login
adminUser name (case-sensitive)
passwordLogin password (case-sensitive)
Use default hardware addressWAN MAC addressInternet
connection
1500WAN MTU size
AutoSensingPort speed
192.168.1.1LAN IPLocal network
(LAN)
255.255.255.0Subnet mask
EnabledDHCP server
192.168.1.2 to 192.168.1.254DHCP range
(GMT) Greenwich Mean Time: Dublin, Edinburgh, Lisbon,
London
Time zone
192.168.1.2DHCP starting IP address
192.168.1.254DHCP ending IP address
DisabledDMZ
DisabledTime adjusted for daylight saving
time
All disabledInbound (communications coming
in from the Internet)
Firewall
All enabledOutbound (communications going
out to the Internet)
Supplemental Information
176
Nighthawk AC1900 WiFi LTE Modem Router
To Next Page
Loading...
