Install the ReadySHARE Printer Utility
You must install the ReadySHARE Printer utility on each computer that will share the printer. After you install
it, the utility displays as NETGEAR USB Control Center on your computer.
To install the utility:
1. If necessary, unzip the ReadySHARE Printer utility setup file.
2. Double-click the ReadySHARE Printer utility setup file that you downloaded.
3. Follow the wizard instructions to install the NETGEAR USB Control Center.
4. Select a language from the menu and click the OK button.
The USB printer connected to the router displays in the NETGEAR USB Control Center window.
Some firewall software, such as Comodo, blocks the NETGEAR USB Control Center from accessing
the USB printer. If you do not see the USB printer displayed on the page, you can disable the firewall
temporarily to allow the utility to work.
Share a USB Printer
139
Nighthawk AC1900 WiFi LTE Modem Router
To Next Page
Loading...
