NETGEAR R7100LG

If the service that you want to add is not in the menu, create a custom service. See Add a Custom Port
Forwarding Service on page 146.
10. In the Server IP Address field, enter the IP address of the computer that will provide the service.
11. Click the Add button.
The service displays in the menu.
Add a Custom Port Forwarding Service
To add a custom service:
1. Find out which port number or range of numbers the application uses.
You can usually find this information by contacting the publisher of the application or user groups or
news groups.
2. Launch a web browser from a computer or WiFi device that is connected to the network.
3. Enter http://www.routerlogin.net.
A login window opens.
4. Enter the modem router user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding/Port Triggering page displays.
6. Leave the Port Forwarding radio button selected as the service type.
7. Click the Add Custom Service button.
8. In the Service Name field, enter a descriptive name.
9. From the Service Type menu, select the protocol.
If you are unsure, select TCP/UDP.
10. In the External Starting Port field and External Ending Port field, enter the port numbers.
Customize Internet Traffic Rules for Ports
146
Nighthawk AC1900 WiFi LTE Modem Router