6. Click the Add Service button.
7. In the Service Name field, type a descriptive service name.
8. From the Service User menu, select a user option:
• Any (the default) allows any computer on the Internet to use this service.
• Single address restricts the service to a particular computer.
9. From the Service Type menu, select TCP or UDP or TCP/UDP (both).
If you are not sure, select TCP/UDP.
10. In the Triggering Port field, enter the number of the outbound traffic port that will open the inbound
ports.
11. In the Connection Type, Starting Port, and Ending Port fields, enter the inbound connection information.
12. Click the Apply button.
The service is now in the Portmap Table.You must enable port triggering before the router uses port
triggering. See Enable Port Triggering on page 150.
Enable Port Triggering
To enable port triggering:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
Customize Internet Traffic Rules for Ports
150
Nighthawk AC1900 WiFi LTE Modem Router
To Next Page
Loading...
