User Manual for the NETGEAR 108 Mbps Wireless PCI Adapter WG311T
3-6
v4.0, February 2006
For more details about connecting, see “Connecting to Wireless Networks and the Internet” on
page 3-8.
For Windows 2000 Users Installing a WG311T
1. First, install the WG311T software.
a. Insert the NETGEAR CD.
If the CD
main page does not appear, double click
autorun.exe on the CD.
b. Click the Install Software link and the
Smart Wizard starts.
c. Follow the Wizard steps, and click Next
to continue.
d. When the Installation Complete
message appears, click Next.
Figure 3-7
2. Now, connect the wireless PCI adapter.
a. Shut down your computer and unplug
the power cord.
b. Open the case and insert your WG311T
into a PCI slot.
c. Connect the antenna to the adapter and
position the antenna to the up position.
d. Close the case, plug the power cord
back in, and restart your computer.
Figure 3-8
To Next Page
Loading...
