NETGEAR WG311T - Advanced Settings and Network Scanning

User Manual for the NETGEAR 108 Mbps Wireless PCI Adapter WG311T
4-14
v4.0, February 2006
3. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply.
c. Click Close to exit the Smart Wizard.
Advanced Settings
The Advanced Settings should normally work in their default settings. On the Settings tab click the
Advanced Settings button to display the dialog box shown below:
Networks Tab
The Networks tab scans and displays all available wireless networks in your area.
1. Use the icon to open the Smart Wizard. The Settings tab page opens.
2. Click the Networks tab.
Figure 4-10