NETGEAR WG311T User Manual

User Manual for the NETGEAR 108 Mbps Wireless PCI Adapter WG311T
3-11
v4.0, February 2006
Removing the WG311T Software
You can remove the wireless adapter software in these two ways:
• Navigate the Windows Start menu to the WG311T Wireless PCI Adapter program group,
select the uninstall option, and follow the screen prompts.
• Navigate the Windows Start menu to the Control Panel Add or Remove Program item, select
the WG311T Wireless PCI Adapter option, and follow the screen prompts.
Upgrading the WG311T Software
Upgrades may be available at the NETGEAR Web site. To install an upgrade, follow these steps.
1. Write down the settings for any profiles that you want to save. They will not be retained.
2. Download the upgrade from the NETGEAR Web site Support page.
3. Remove the WG311T software from your computer.
4. Shut down the computer.
5. Remove the WG311T adapter from your computer, and restart your computer.
6. Run the installer that you downloaded (the file ends in .exe).
7. Follow the installer instructions, and if prompted, then restart your computer.

NETGEAR WG311T Specifications

General

Brand	NETGEAR
Model	WG311T
Category	PCI Card
Language	English