NETGEAR WG311T User Manual

User Manual for the NETGEAR 108 Mbps Wireless PCI Adapter WG311T
4-4
v4.0, February 2006
1. Use the icon to open the Smart Wizard. The Settings page opens.
2. Enter the network settings.
a. In the Network Type section, be sure that Access Point (Infrastructure) is selected.
b. In the Profile box, type the name of the profile.
c. In the Network Name (SSID) field select a network or enter the SSID.
3. Save your settings in a Profile.
a. Click the Save Profile button.
All the configuration settings are saved in this profile.
b. Click Apply.
c. Click Close to exit the wizard, or Cancel to return to the previous settings.
4. Verify wireless connectivity to your network.
Verify connectivity by using a browser such as Netscape or Internet Explorer to connect to the
Internet, or check for file and printer access on your network.
Figure 4-2
Note: You will not get a wireless network connection unless the network SSID
matches exactly the SSID used by the access point.

NETGEAR WG311T Specifications

General

Brand	NETGEAR
Model	WG311T
Category	PCI Card
Language	English