User Manual for the NETGEAR 108 Mbps Wireless PCI Adapter WG311T
4-12
v4.0, February 2006
b. Use the icon to open the Smart Wizard. The Settings tab page opens.
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
c. In the Security section, select WPA2-PSK [AES] and enter the passphrase. The passphrase
can be a word or a group of printable characters.
For more information about WPA2-PSK security, see the Web link to “Wireless
Communications:” in Appendix B.
3. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply.
c. Click Close to exit the Smart Wizard.
Figure 4-8
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.
To Next Page
Loading...
