User Manual for the NETGEAR 54 Mbps Wireless PC Card WG511 v2
2-4 Basic Setup
June 2005
d. The Connection Wizard opens and prompts you to
insert the wireless adapter.
2. Now, insert the wireless adapter.
You will be prompted to choose the country you are
located in. Select your location from the list.
3. Use the Smart Wizard to set up your wireless adapter.
a. Choose to configure your wireless adapter either
with the NETGEAR Smart Wizard (recommended)
or the Windows configuration utility.
b. Click Next to accept the NETGEAR Smart Wizard.
You will be asked if you want the Connection Wizard
to guide you (recommended).
c. Click Finish to accept.
The Connection Wizard will show your progress and
record your choices
Note: If you choose the Windows
Zero Configuration option, you must
read the Windows XP documentation
for setup and configuration
To Next Page
Loading...
