User Manual for the NETGEAR 54 Mbps Wireless PC Card WG511 v2
Basic Setup 2-7
June 2005
The Connection Wizard initiates your wireless connection. It could take up to a minute for
your wireless connection to be established. The Smart Wizard Wireless Assistant Settings
page opens.
4. Use the status bar to verify your wireless connectivity.
For more detailed information about connecting, see “Connecting to Wireless Networks and
the Internet” on page 2-7.
Connecting to Wireless Networks and the Internet
The WG511 v2 has indicators in three locations that show the status of your connection to a
wireless network and to the Internet:
• System Tray Icon: After you install the WG511 v2 software, the icon appears in the
lower right of the Windows task bar. It is color coded to show the status of the connection. See
“The Smart Wizard Status Bar” on page 2-8
• Smart Wizard Status Bar: Clicking on the system tray icon opens the Smart Wizard Wireless
Assistant. The status bar at the bottom of the page shows details about your wireless and
Internet connection.
• WG511 v2 Wireless PC Card LEDs: The two LEDs on the wireless card show the speed of
the network connection.
To Next Page
Loading...
