NETGEAR WGT624 User Manual

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
3-2 Configuring the Internet and Wireless Settings
202-10090-01, April 2005
Initial Configuration
1. Insert the Resource CD into the CD drive on your PC. The following screen appears:
Figure 3-1: Smart Wizard Installation Assistant Startup screen
2.
Click Setup and follow the instructions. The Smart Wizard Installation Assistant will guide
you through the setup process:
• How to change your cabling.
• How to connect to the Internet.
• How to configure your wireless settings.
– When you get to the wireless settings, you will have to select the country where you
are located and decide whether you want to have security on your wireless links
(Netgear strongly recommends enabling security).
– Depending on the type of security you select, you will also have to enter security key
or passphrase information (see “Wireless Settings” on page 3-10 for information on
the wireless authentication and encryption parameters).
Click SETUP
to get started

NETGEAR WGT624 Specifications

General

Wireless Standard	802.11g
Frequency Band	2.4 GHz
LAN Ports	4 x 10/100 Mbps
WAN Port	1 x 10/100 Mbps
Standards	IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u
Wireless Data Rates	Up to 54 Mbps
Security	WPA, WEP
Firewall	SPI Firewall
Weight	270 g