NETGEAR WGT624 User Manual

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
Configuring the Internet and Wireless Settings 3-3
202-10090-01, April 2005
If you want to change your Internet or wireless settings later, see “Changing Your
Configuration” on page 3-6.
Logging Into Your Router
To log into your router after you have configured your router, do the following:
1. Type http://www.routerlogin.net in the address field of Internet Explorer or Netscape®
Navigator.
Figure 3-2: Log in to the router
2.
When prompted, enter admin for the router user name and password for the router password,
both in lower case letters (or enter the password you chose if you changed it during the setup
in “Initial Configuration” on page 3-2).
Note: The router user name and password are not the same as any user name or password you
may use to log in to your Internet connection.
A login window like the one shown below opens:
Figure 3-3: Login window

NETGEAR WGT624 Specifications

General

Wireless Standard	802.11g
Frequency Band	2.4 GHz
LAN Ports	4 x 10/100 Mbps
WAN Port	1 x 10/100 Mbps
Standards	IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u
Wireless Data Rates	Up to 54 Mbps
Security	WPA, WEP
Firewall	SPI Firewall
Weight	270 g