Chapter 2. Advanced Settings | 11
Universal WiFi Internet Adapter WNCE2001
Show Statistics
On the Device Status screen, click Show Statistics to display the following screen:
Table 2. Show Statistics Fields
Field Description
LAN or WLAN The statistics for the LAN (local), and wireless LAN (WLAN) ports. For each
port, the screen displays the following:
Status The link status of the port.
TxPkts The number of packets transmitted on this port since reset or the connection
was established.
RxPkts The number of packets received on this port since reset or the connection
was established.
Collisions The number of collisions on this port since reset or the connection was
established.
Tx B/s The current line utilization—percentage of current bandwidth used on this
port.
Rx B/s The average line utilization for this port.
Up Time The time elapsed since the last power cycle, reset, or when the connection
was established.
Poll Interval Specify the poll interval frequency. If you change this value, click Set
Interval so that your change takes effect.
To Next Page
Loading...
Need help?
General