NETGEAR WNCE2001 - Ethernet to Wireless Adapter User Manual

Chapter 2. Advanced Settings | 9
2
2. Advanced Settings
To change advanced settings, connect the Internet adapter to your computer and use your
Internet browser to go to http://www.mywifiext.net as described in Preparing to Change Your
Internet Adapter Settings on page 6.
Device Status Screen
When you connect to http:/www.mywifiext.net, after the automatic firmware check, the
Device Status screen displays:
This screen shows the current settings and the status of your Internet adapter.
• You can click Show Statistics to see device performance statistics such as the number
of packets sent and number of packets received for each port. See Show Statistics on
page 11.
• Click DHCP Status to see information about your current DHCP connection. See DHCP
Connection Status on page 12.
• The following table describes the fields in the Device Status screen.

NETGEAR WNCE2001 - Ethernet to Wireless Adapter Specifications

General

Device Type	Ethernet to Wireless Adapter
Brand	NETGEAR
Model	WNCE2001
Wireless Standards	802.11b/g/n
Wireless Speed	Up to 300 Mbps
Wireless Security	WEP, WPA, WPA2
Ethernet Port	1 x 10/100 Mbps
Frequency Band	2.4 GHz
Antenna	Internal
Power	5V DC
Weight	0.16 lbs