Chapter 1. Getting Started | 5
Universal WiFi Internet Adapter WNCE2001
Power Connection Options
Depending on the cable that you received with your product, you might need a plug converter
to connect the Internet adapter to the power adapter. If it is needed, the plug converter is
included in the box.
Figure 2. Plug converter
You can power on your Internet adapter using either of these methods:
• Method 1: Connect the Internet adapter to an electrical outlet with the included power
adapter.
Figure 3. Power adapter
• Method 2: Connect the Internet adapter to a USB port on a nearby computer or device
with the USB power cable:
Figure 4. USB power cable
Make sure that the device where you connect the USB power cable is powered on. Some
USB ports on consumer electronic devices cannot provide the power that the Internet
adapter requires. In such cases, the power LED turns solid red and the Internet adapter
may reset itself or turn itself off. If this happens, try connecting the USB cable to a
different device, or use the Internet adapter power adapter instead.
To Next Page
Loading...
Need help?
General
