NETGEAR WNDR3400v2 User Manual

Genie Advanced Home
35
N600 Wireless Dual Band Router WNDR3400v2
Setup Wizard
The NETGEAR Genie installation process is launched the first time you set up the router.
After setting up the router the first time, if you want to perform this task again, you can run
Setup Wizard from the Advanced tab of the Genie.
1. Select Setup Wizard to display the following screen:
2. Select either Yes or No, I want to configure the router myself. If you select No, you are
taken to the Internet Setup screen (see Internet Setup on page 23).
3. If you selected Yes, click Next. The following screen displays:
The Setup Wizard searches your Internet connection for servers and protocols to
determine your ISP configuration. The following screen displays:

NETGEAR WNDR3400v2 Specifications

General

Brand	NETGEAR
Model	WNDR3400v2
WiFi Range	Medium to large homes
Wireless Standard	802.11a/b/g/n
Frequency Band	2.4 GHz and 5 GHz
USB Ports	1 x USB 2.0
WiFi Speed	Up to 300 Mbps (2.4 GHz) + 300 Mbps (5 GHz)
Ethernet Ports	4 x 10/100 Mbps
Security Features	WPA/WPA2
Firewall Features	SPI, NAT
Antenna	Internal antennas
Weight	0.7 lb (0.32 kg)