NETGEAR WNDR3400v2 User Manual

110
A
A. Supplemental Information
This appendix provides factory default settings and technical specifications for the N600
Wireless Dual Band Router WNDR3400v2.
Factory Settings
You can return the router to its factory settings. Use the end of a paper clip or some other
similar object to press and hold the Restore Factory Settings button on the back of the
router for at least 5 seconds. The router resets and returns to the factory settings.
Your
device returns to the factory configuration settings shown in the following table.
Table 4. Factory default settings
Feature Default behavior
Router login User login URL www.routerlogin.com or www.routerlogin.net
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
connection
WAN MAC address Use default hardware address
WAN MTU size 1500
Port speed Autosensing
Local network
(LAN)
LAN IP 192.168.1.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP range 192.168.1.2 to 192.168.1.254
Time zone Pacific time
Time zone daylight saving time Disabled
Allow a registrar to configure this
router
Enabled

NETGEAR WNDR3400v2 Specifications

General

Brand	NETGEAR
Model	WNDR3400v2
WiFi Range	Medium to large homes
Wireless Standard	802.11a/b/g/n
Frequency Band	2.4 GHz and 5 GHz
USB Ports	1 x USB 2.0
WiFi Speed	Up to 300 Mbps (2.4 GHz) + 300 Mbps (5 GHz)
Ethernet Ports	4 x 10/100 Mbps
Security Features	WPA/WPA2
Firewall Features	SPI, NAT
Antenna	Internal antennas
Weight	0.7 lb (0.32 kg)