Need help?Do you have a question about the NETGEAR WNDR3400v2 and is the answer not in the manual?
General| Brand | NETGEAR |
|---|---|
| Model | WNDR3400v2 |
| WiFi Range | Medium to large homes |
| Wireless Standard | 802.11a/b/g/n |
| Frequency Band | 2.4 GHz and 5 GHz |
| USB Ports | 1 x USB 2.0 |
| WiFi Speed | Up to 300 Mbps (2.4 GHz) + 300 Mbps (5 GHz) |
| Ethernet Ports | 4 x 10/100 Mbps |
| Security Features | WPA/WPA2 |
| Firewall Features | SPI, NAT |
| Antenna | Internal antennas |
| Weight | 0.7 lb (0.32 kg) |
Instructions for opening the box and identifying router components.
Guidance on selecting an optimal location for the router for best performance.
Overview of the router's physical features and components.
Step-by-step guide for connecting the router to the modem and network devices.
Instructions to check physical connections using router LEDs.
Steps to prepare for router setup, including gathering ISP information.
Essential information needed from the ISP to configure the router for internet access.
Guide on using NETGEAR Genie for the initial router setup process.
How to access and use NETGEAR Genie after the initial setup is complete.
Instructions for updating the router's firmware for new features and security.
Overview of the router's main dashboard and its sections.
Instructions for adding wireless devices to the network.
Screen to view or change Internet Service Provider (ISP) information.
View and manage devices connected to the network, showing IP and MAC addresses.
View and manage USB storage devices connected to the router.
View and configure wireless network settings, including preset security.
How to change WPA security settings and set a network passphrase.
Steps to set up a guest network for visitors to access the internet.
Guided process for initial router setup and ISP configuration.
Wizard to easily add WPS-capable devices to the network.
Configure WAN settings like DMZ, MTU size, and DoS protection.
Configure Local Area Network (LAN) settings, including IP addressing and DHCP.
Configure QoS to prioritize network traffic for applications or devices.
Create QoS policies for applications and online games.
How to access shared USB storage devices from network computers.
Block specific HTTP traffic using keywords or domain names.
Block specific internet services by port number or range.
Process for updating router firmware to the latest version.
View router status and usage information, including hardware and firmware versions.
Configure wireless settings for both 2.4 GHz and 5 GHz bands.
Back up, restore, or reset router configuration settings.
Change the router's administrative login password.
Configure advanced wireless parameters like transmit power and signal scheduling.
Explanation of the Wireless Distribution System (WDS) functionality.
Configure the router to function as a wireless repeater or base station.
Overview of features for creating exceptions to default traffic blocking rules.
Configure port triggering to open ports dynamically for specific applications.
Set up port forwarding to allow external access to local network servers.
Guide to forwarding incoming traffic to local servers like web or FTP servers.
Steps to configure port triggering for applications needing dynamic port access.
Configure Dynamic DNS to access the router using a domain name.
Set up remote access to manage the router over the internet.
Using router LED indicators to diagnose problems.
Steps to resolve issues preventing login to the router interface.
Steps to diagnose and fix problems preventing internet access.
How to reset the router to factory default settings and password.
Lists default settings for router login, internet connection, and LAN configuration.
To Next Page
