NETGEAR WNDR3400v2 User Manual

Administration
67
N600 Wireless Dual Band Router WNDR3400v2
View Router Status
To view router status and usage information, select Advanced Home, or select
Administration > Router Status to display the following screen:
Router Information
Hardware Version. The router model.
Firmware Version. The version of the router firmware. It changes if you upgrade the router
firmware.
GUI Language Version. The localized language of the user interface.
LAN Port.
• MAC Address. The Media Access Control address. This is the unique physical address
being used by the Ethernet (LAN) port of the router.
• IP Address. The IP address being used by the Ethernet (LAN) port of the router. The
default is 192.168.1.1.
• DHCP Server. Identifies whether the router’s built-in DHCP server is active for the
LAN-attached devices.
Internet Provider (WAN) Setup
MAC Address. The Media Access Control address. This is the unique physical address
being used by the Internet (WAN) port of the router.
IP Address. The IP address being used by the Internet (WAN) port of the router. If no
address is shown or the address is 0.0.0, the router cannot connect to the Internet.

NETGEAR WNDR3400v2 Specifications

General

Brand	NETGEAR
Model	WNDR3400v2
WiFi Range	Medium to large homes
Wireless Standard	802.11a/b/g/n
Frequency Band	2.4 GHz and 5 GHz
USB Ports	1 x USB 2.0
WiFi Speed	Up to 300 Mbps (2.4 GHz) + 300 Mbps (5 GHz)
Ethernet Ports	4 x 10/100 Mbps
Security Features	WPA/WPA2
Firewall Features	SPI, NAT
Antenna	Internal antennas
Weight	0.7 lb (0.32 kg)