NETGEAR WNDR3800 User Manual

Advanced Settings
111
N600 Wireless Dual Band Gigabit Router Premium Edition WNDR3800
IPv6
You can use this feature to set up an IPv6 Internet connection type if NETGEAR Genie does
not detect it automatically.
 To set up an IPv6 Internet connection type:
1. Select Advanced > Advanced Setup > IPv6 to display the following screen:
2. Select the IPv6 connection type from the list. Your Internet service provider (ISP) can
provide this information.
• If your ISP did not provide details, you can select IPv6 Tunnel.
• If you are not sure, select Auto Detect so that the router detects the IPv6 type that is
in use.
• If your Internet connection does not use PPPoE, DHCP, or fixed, but is IPv6, then
select IPv6 auto config.
3. Click Apply so that your changes take effect.

NETGEAR WNDR3800 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi standards	802.11a, 802.11b, 802.11g
Channels quantity	2 channels
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	300 Mbit/s
Bandwidth	5 GHz
Interface	USB
Weight (imperial)	1.2 lbs
Dimensions (WxDxH)	223 x 153 x 31 mm
USB ports quantity	1
Minimum system requirements	Internet Explorer 5.0, Firefox 2.0, Safari 1.4
Compatible operating systems	- Windows 7, Vista, XP, 2000 - Mac OS - UNIX - Linux
Dimensions (W x D x H) (imperial)	8.8 x 6 x 1.2 \
DHCP client	-
Supported network protocols	IPv6
Security algorithms	WEP, WPA-PSK, WPA2-PSK
Authentication method	WEP, WPA, WPA2
Ethernet LAN (RJ-45) ports	5
Flash memory	16 MB
Certification	RoHS
Internal memory	128 MB
Cables included	LAN (RJ-45)
Product color	Black

Weight and Dimensions

Weight	5000 g