Initial configuration
8
After editing the network configuration parameters, click the button Change IP, which saves the configuration
and restarts the device. If you have a DHCP server in the network and you do not want to change the
network settings, you can skip the manual setting and continue to the next step.
The default IP address of the device is 192.168.10.100 if you do not have a DHCP server in the network. If
you have, the device gets the address from the DHCP server.
4. You access the web interface of the device either by entering the IP address into the Internet browser, or by
double-clicking the IP address of the device in NETIO discover.
5. The login page is displayed. Enter the User Name, Password and click the OK button. You access the device
page.
The default username is: admin, the password is: admin.
Figure 4.3. Login screen
To login to the web interface, it is necessary to have JavaScript support active in the browser.
To Next Page
Loading...
