1
1. Introduction
The NETIO-230C/CS is a multifunctional power supply controller. This device is intended for control of the power
supply via web interface, telnet, or CGI commands. Thanks to the network administration technology based on
IP protocol basis, the user can control or provide a power supply to a connected external device (appliance) via
a computer connected to the LAN or Internet network. No special software is necessary to control the device.
Web interface is already integrated in the firmware. Using it, you can easily control and set the entire device
and individual outputs.
Imagine that you are travelling around the world and you can directly or via a timer control the power supply
to your electrical appliances, such as, computers, servers, routers, electric gates, security/surveillance system or
any appliance.
1.1. Characteristics
• Integrated web server
• Support for a broad spectrum of browsers:
• Internet Explorer
• Mozilla Firefox
• Opera
• Google Chrome
• Four controllable ports
• Four manual control buttons
• Serial port for control of the device
• Serial tunnel (version NETIO-230CS)
• Support for HTTP, SMTP, SNTP, DHCP, DNS, Telnet protocols
• Control using CGI commands
• Possibility to login using an encrypted password
• User authorisation
• LED indication of the actual state of each port
• Safe anti-electric shock design, fire-resistant materials
• Time control - you can set the on/off time for the requested port
• Default setting of port state after switch-on and restart of the device
• Watchdog function for reset of blocked network device
To Next Page
Loading...
