Updating Firmware
Your LinkRunner G2 accesses software updates
from the Link-Live Cloud Service.
NOTE: You must create an account and "claim"
your LinkRunner G2 unit to the Link-Live Cloud
Service for the LR G2 to find and download
software updates. See Getting Started in Link-Live.
1. To check for updates through the Device Set-
tings, touch the Settings icon at the bot-
tom of the Home Screen.
2. On the Settings screen, scroll down to the
System section and touch About Tester.
3. At the top of the About Tester screen, touch
CHECK FOR UPDATES.
4. On the System Upgrades screen, touch the
Check for Updates button. If a new soft-
ware version is available, it displays below
the Current version shown.
5. Tap the new version number and then
touch Download to download and install
the latest software.
75
Software Management
To Next Page
Loading...
